Context Switching on the Cortex-M3

Thread0->Thread1: Switch
Thread1->Thread2: Switch
Thread2->Thread3: Switch
Thread3->Thread0: Switch

The ARM Cortex-M3 architecture is designed with special features to facilitate implementing a pre-emptive RTOS. The system code takes advantage of these features when implementing context switching code.

ARM Cortex-M3 Context Switching Hardware


The SysTick and PendSV interrupts can both be used for context switching. The SysTick peripheral is a 24-bit timer that interrupts the processor each time it counts down to zero. This makes it well-suited to round-robin style context switching. The PendSV interrupt allows a task to cede control of the CPU when it is inactive (such as when sleeping or waiting for a hardware resource) which is helpful for FIFO style context switching. In addition to these interrupts, the ARM Cortex-M3 also includes two stack pointers.


The stack pointers for the ARM Cortex-M3 include the main stack pointer (MSP) and the process stack pointer (PSP). The MSP is always used when handling interrupts and optionally used during regular program execution. The PSP is only used during regular program execution. ARM recommends using the MSP for the kernel as well as interrupts and recommends the PSP for executing other tasks. While the architecture provides the interrupts and the stack pointers, the implementation must provide the context switching code.

Context Switching Software Implementation

The RTOS manages the interrupts and stacks to achieve context switching. When switching contexts, the RTOS needs a way to keep track of which tasks are doing what using a task or scheduler table. Three routines are then required to: perform the context switch, initialize the system, and create new tasks.

Task Table

The task table, at a minimum, saves each task’s stack pointer; it is also helpful to save other information, such as the task parent and status, to allow the context switcher to selectively execute tasks. The following code shows an example of a structure that can be used for an entry in the task table:

typedef struct {
     void * sp; //The task's current stack pointer
     int flags; //Status flags include activity status, parent task, etc
} task_table_t;
int current_task;
task_table_t task_table[MAX_TASKS];

The sp member stores the value of the task’s stack pointer, while the flags member holds the task status. In this example, the task uses two status bits: one to indicate that the table entry is in use and the other to specify whether or not to execute the task.

Context Switching Routine

The context switcher needs to:

  • save the state of the current task,
  • update the current task index to the next task to be executed,
  • set up the CPU to use the MSP (if it’s time to run the kernel) or the PSP,
  • and finally, load the context of the task which is about to execute.

The following code is an example of a context switcher, preceded by some helper functions, and the interrupt handlers.

static uint32_t * stack; //This is stored on the heap rather than the stack

#define MAIN_RETURN 0xFFFFFFF9  //Tells the handler to return using the MSP
#define THREAD_RETURN 0xFFFFFFFD //Tells the handler to return using the PSP

//Reads the main stack pointer
static inline void * rd_stack_ptr(void){
  void * result=NULL;
  asm volatile ("MRS %0, msp\n\t"
      //"MOV r0, %0 \n\t"
      : "=r" (result) );
  return result;

//This saves the context on the PSP, the Cortex-M3 pushes the other registers using hardware
static inline void save_context(void){
  uint32_t scratch;
  asm volatile ("MRS %0, psp\n\t"
      "STMDB %0!, {r4-r11}\n\t"
      "MSR psp, %0\n\t"  : "=r" (scratch) );

//This loads the context from the PSP, the Cortex-M3 loads the other registers using hardware
static inline void load_context(void){
  uint32_t scratch;
  asm volatile ("MRS %0, psp\n\t"
      "LDMFD %0!, {r4-r11}\n\t"
      "MSR psp, %0\n\t"  : "=r" (scratch) );

//The SysTick interrupt handler -- this grabs the main stack value then calls the context switcher
void systick_handler(void){
    save_context();  //The context is immediately saved
    stack = (uint32_t *)rd_stack_ptr();
    if ( SysTick->CTRL & (1<16) ){ //Indicates timer counted to zero
    load_context(); //Since the PSP has been updated, this loads the last state of the new task

//This does the same thing as the SysTick handler -- it is just triggered in a different way
void pendsv_handler(void){
    save_context();  //The context is immediately saved
    stack = (uint32_t *)rd_stack_ptr();
    load_context(); //Since the PSP has been updated, this loads the last state of the new task

//This reads the PSP so that it can be stored in the task table
static inline void * rd_thread_stack_ptr(void){
    void * result=NULL;
    asm volatile ("MRS %0, psp\n\t" : "=r" (result) );

//This writes the PSP so that the task table stack pointer can be used again
static inline void wr_thread_stack_ptr(void * ptr){
    asm volatile ("MSR psp, %0\n\t" : : "r" (ptr) );

This is the function for the actual context switcher. This context switcher uses the MSP for task 0 (assumed to be the kernel) and the PSP for other tasks. It is also possible to use the PSP for the kernel and just use the MSP during interrupt handling.

//This is the context switcher
void context_switcher(void){
   task_table[current_task].sp = rd_proc_stack_ptr(); //Save the current task's stack pointer
   do {
      if ( current_task == MAX_TASKS ){
         current_task = 0;
         *((uint32_t*)stack) = MAIN_RETURN; //Return to main process using main stack
      } else if ( task_table[current_task].flags & EXEC_FLAG ){ //Check exec flag
         //change to unprivileged mode
         *((uint32_t*)stack) = THREAD_RETURN; //Use the thread stack upon handler return
   } while(1);
   wr_proc_stack_ptr( task_table[current_task].sp ); //write the value of the PSP to the new task

The following diagram shows the chronology of the stack pointer when a switch happens between task one and task two. Note that because this implementation uses the MSP for task zero, the mechanics of a context switch are slightly different when switching to and from task zero. A context switching implementation can just as easily use the PSP for all tasks and the MSP for interrupts by using THREAD_RETURN rather than MAIN_RETURN above.

PSP Chronology


The first thing that must be done is to initialize the main stack’s task table entry.

//This defines the stack frame that is saved  by the hardware
typedef struct {
  uint32_t r0;
  uint32_t r1;
  uint32_t r2;
  uint32_t r3;
  uint32_t r12;
  uint32_t lr;
  uint32_t pc;
  uint32_t psr;
} hw_stack_frame_t;

//This defines the stack frame that must be saved by the software
typedef struct {
  uint32_t r4;
  uint32_t r5;
  uint32_t r6;
  uint32_t r7;
  uint32_t r8;
  uint32_t r9;
  uint32_t r10;
  uint32_t r11;
} sw_stack_frame_t;

static char m_stack[sizeof(sw_stack_frame_t)];

void task_init(void){
     task_table[0].sp = m_stack + sizeof(sw_stack_frame_t);
    //The systick needs to be configured to the desired round-robin time
    //..when the systick interrupt fires, context switching will begin

Creating a New Task

Once the context switcher is initialized, there needs to be a mechanism to start new tasks. Starting a new task involves finding an available entry in the task table and initializing the new task’s stack.

int new_task(void *(*p)(void*), void * arg, void * stackaddr, int stack_size){
    int i, j;
    void * mem;
    uint32_t * argp;
    void * pc;
    hw_stack_frame_t * process_frame;
    //Disable context switching to support multi-threaded calls to this function
    for(i=1; i < MAX_TASKS; i++){
        if( core_proc_table[i].flags == 0 ){
            process_frame = (hw_stack_frame_t *)(stackaddr - sizeof(hw_stack_frame_t));
            process_frame->r0 = (uint32_t)arg;
            process_frame->r1 = 0;
            process_frame->r2 = 0;
            process_frame->r3 = 0;
            process_frame->r12 = 0;
            process_frame->pc = ((uint32_t)p);
            process_frame->lr = (uint32_t)del_process;
            process_frame->psr = 0x21000000; //default PSR value
            core_proc_table[i].flags = IN_USE_FLAG | EXEC_FLAG;
            core_proc_table[i].sp = mem +
                stack_size -
                sizeof(hw_stack_frame_t) -
    systick_enable_irq();  //Enable context switching
    if ( i == MAX_TASKS ){
        //New task could not be created
        return 0;
    } else {
        //New task ID is i
        return i;

//This is called when the task returns
void del_process(void){
  task_table[current_task_index].flags = 0; //clear the in use and exec flags
  SCB->ICSR |= (1<<28); //switch the context
  while(1); //once the context changes, the program will no longer return to this thread


ARM, with the Cortex M architecture, delivers valuable hardware resources to enable context switching. The interrupts support both round robing and FIFO style scheduling while the dual stacks allow the kernel process and interrupt handlers to execute on a dedicated stack. With just a few software routines to perform the context switching, initialize the system, and create new stacks, system developers can create a functioning pre-emptive kernel.

For more information on context switching on the Cortex-M3, see the Cortex-M3 technical reference manual from ARM.